Studer RCC-02, Руководство пользователя

Страница: 24 / 104

Studer Innotec SA
RCC-02/-03
20
V4.4.0
User manual
The settings of the VarioString
(Only if a VarioString MPPT is present)
To go from one display to the other, use the keys UP and DOWN on the RCC remote control.
To visualize or modify the options of one of the basic displays, press the key SET when this one is
displayed.
Depending on the components connected to your system, it is possible that other
displays complete this serie.
In the case of a system in 3-phase or in parallel, the following displays are available too:
Real time display of information on the state of running of
the installation
8 ACTIVATING AND DEACTIVATING THE COMBI XTENDER
When one of the displays is visible, it is possible to activate or deactivate the Xtender. To do this,
simply press the key ESC. The key request on the screen indicates whether you are going to activate
or deactivate the unit.
Once the key has been pressed, you must confirm your
choice by using the key YES. If you do not want the action
to be carried out, it can be cancelled by pressing the NO
key.
Note: This is a comprehensive signal and leads to the stoppage or starting of all
Xtenders connected to the remote control.
The Xtender can also be turned ON or OFF directly on the Xtender with the button:
9 QUICK SETTING OF THE MAXIMUM SOURCE AC CURRENT
It is possible to access directly to the setting of the AC source maximum current (Input limit) {1107}
with the key SET (FAST) from the simplified display (clock).
For the users travelling, the available source often differs in power. This quick access
menu allows to easily set the maximum current available.