Studer OnAir 3000, Руководство по эксплуатации

Страница: 304 / 372

D21m System
5-2 Additional Info
Date printed: 31.03.09
5.2 Special Case: Microphone/Line Input Card
The smallest modularity of channels used up within the MADI and Core link
is eight. If an odd number of Mic/Line input cards is used, they should be
inserted in pairs, with the last card in an odd slot (no. 1, 3, 5...) This single
card will allocate 8 channels but only 4 of them will have audio. If a Mic/Line
input card pair uses Analog Insert cards, they should be placed in the next
double slot on the right, as shown in chapter 5.3.
For clearness, see the following examples:
Example 1:
Input Cards MADI Channel Usage
10 Mic/Line Input cards (40 channels) 1...40
2 Line Input cards (16 channels) 41...56
Example 2:
Input Cards MADI Channel Usage
9 Mic/Line Input cards (36 channels) 1...36 (37...40 no audio)
2 Line Input cards (16 channels) 41...56
Example 3:
Input Cards MADI Channel Usage
9 Mic/Line Input cards (36 channels) 1...36 (37...40 no audio)
3 Line Input cards (24 channels) 41...64
5.3 Analog Insert Cards
If you plan to equip the I/O box with Analog Insert cards, it is wise to avoid
channels without signal by installing two Mic/Line Input cards next to each
other, followed by two Analog Insert cards to their right. The Analog Insert
cards will be connected to “their” Mic/Line Input card by a ribbon cable. After
that, more Mic/Line Input cards may be inserted. This way all channels within
the hub-to-core link will be carrying audio, since there is always a group of
8 channels inserted next to each other. The two Analog Insert cards will not
use any channels within the link. The ribbon cables are lead through slots
provided in both the Mic/Line Input and Analog Insert cards.
(Front Panels)
Analog Insert
Cards
Mic/Line Input
Cards