manualshive.com logo in svg

Studer OnAir 3000, Руководство по эксплуатации


Поделиться
Скачать
background image

OnAir 3000 Digital Mixing Console

Operating Elements  4-7

SW V3.0

Date printed: 31.10.08

4.4        Fader Module, OLED Version

                                                           The fader module with the OLED (organic LED) display contains six fader 

strips 

(only one of them shown in the illustration on the left)

. Up to eight fader 

modules can be combined, giving the maximum configuration for a 48-chan-
nel desk.

                                                           The fader strip has been designed with as few operating elements as possible. 

All other functions are ava  ilable through the configurable user keys or on the 
central touch-screen. 

                                                           Every fader strip contains four large, configurable keys, the fader 

(optional: 

motor fader)

, a channel-active indicator (illuminated if: channel is ON, fader 

is open, channel is assigned to a main output, and master fader is open), a 
rotary encoder and associated keys, an overload LED and an graphical OLED 
channel label display. For direct access to the most used functions, the direct 
access keys are available. After pressing one of them, parameters can now be 
entered on the central touch screen, either by the rotary encoders (e.g. input 
selection or gain) or by the corresponding buttons (e.g. EQ on/off). The new 
settings are immediately visible on the central screen. 

                                                           The large keys as well as the user keys can be freely configured and assigned, 

and the large keys have transparent snap-on caps for convenient labeling. This 
allows for example to have ON and OFF keys at the lower end of the channel 
strip if required, or to assign a different function to the TB key if the source 
is e.g. a CD player. These settings are input source-related and will automati-
cally follow the source in case the routing is changed. 

                                                    

ON 

Pressing the key toggles the channel on/off function. In the audio path, the 
on/off  switch is located 

after 

fader and panning.   

                                                           On status is indicated by illuminating the key.
                                                           The function is disabled when the corresponding fader is configured as master 

fader for a certain bus.

                                               

Ÿ

PFL

  The purpose of 

PFL

 is to feed the pre-fader audio signal of the desired channel 

or AUX send, group, or master (program, record) to the PFL bus. If active, 
the key is illuminated in yellow.

                                                           If the “PFL Cut on Channel Active” function (also referred to as “broadcast 

PFL mode”) is enabled, audio signals are temporarily cut from the PFL bus 
as long as the channel is ON and the fader is open. In such a case the 

PFL

 key 

is illuminated in amber.

                                                           Please note that this key may also be configured as 

CUE

 key. The purpose of 

CUE

 is to feed the after-fader, after-pan and pre-ON audio signal of the desired 

channel or AUX send, group, or master (program, record) to the PFL bus. If 
active, the key is illuminated in yellow.

                    

Ÿ

 

Direct Access Keys

  When pressing one of these keys, the corresponding page is displayed on 

the central screen and shows the last active menu. There, the user can adjust 
parameters for this channel or select a different page – either by the touch 
fields and/or the rotary encoders below the central screen, or by the PC mouse 
and keyboard. As long as a page is displayed, its direct access key is illumi-
nated. When deselecting the key, the page that was previously displayed pops 
up again.

                                                           Since the insert page is common for all fader strips, the INS key is not illu-

minated while the page is displayed.

Channel

Label
Text Field

Channel

Rotary

Encoder

Pro-

gramm-

able

Keys

Pro-

gramm-

able

Keys

Channel

Active

User

Keys

Direct

Access

Keys

Level

Meter

Gain

Red.

Meter

(GRM)

Overload

Indicator

Fader

100 mm

(Motor &

Over-

press

Optional)

Содержание OnAir 3000





















































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для OnAir 3000

Paramount Fitness BM10 Installation & Operation Manual preview
BM10
Бренд: Paramount Fitness Страницы: 17
F.F. Group MX 1200 PRO Original Instructions Manual preview
MX 1200 PRO
Бренд: F.F. Group Страницы: 36
Yamaha MG124CX Owner'S Manual preview
MG124CX
Бренд: Yamaha Страницы: 24
Palmer PETIMEP User Manual preview
PETIMEP
Бренд: Palmer Страницы: 60
Erbe VIO 20188-300 Manual preview
VIO 20188-300
Бренд: Erbe Страницы: 114
Quooker Nordic Square Installation Manual preview
Nordic Square
Бренд: Quooker Страницы: 8
Hamilton Beach 62670 Use & Care Manual preview
62670
Бренд: Hamilton Beach Страницы: 32
Voodoo Lab TREMOLO II User Manual preview
TREMOLO II
Бренд: Voodoo Lab Страницы: 2
Akai QX-D3100 Service Manual preview
QX-D3100
Бренд: Akai Страницы: 20
IVIE 802A Operation And Owner'S Manual preview
802A
Бренд: IVIE Страницы: 8
Ozito Power X Change PXMMS-120 Instruction Manual preview
Power X Change PXMMS-120
Бренд: Ozito Страницы: 6
Ozito DMM-080 Instruction Manual preview
DMM-080
Бренд: Ozito Страницы: 14
Ozito CMX-080 Operation Manual preview
CMX-080
Бренд: Ozito Страницы: 17
Nokia N-GAGE QD User Manual preview
N-GAGE QD
Бренд: Nokia Страницы: 210
Samson MDR 8 Owner'S Manual preview
MDR 8
Бренд: Samson Страницы: 24
Philips Harmony DCB8000 Specifications preview
Harmony DCB8000
Бренд: Philips Страницы: 3
Philips MC108C User Manual preview
MC108C
Бренд: Philips Страницы: 18
Philips MC1000 User Manual preview
MC1000
Бренд: Philips Страницы: 17

Бренды по названию

Популярные бренды

Загрузить еще бренды