Studer OnAir 3000 Скачать руководство пользователя страница 129

Страница: 129 / 372

OnAir 3000 Digital Mixing Console

Operation 5-77

Date printed: 31.10.08

SW V3.0

A dialog box “

Snapshot ‘name’ already exists. Do you really want to

overwrite it?

” pops up. When answering

Yes

, all selected parameter files

will be overwritten.

Note: If a snapshot containing audio, input routing, output routing, and assignment

parameters is overwritten by a snapshot only containing e.g. audio param-
eters, the old input/output routing and assignment parameters will be lost!

Selected Item in Local List

ADD USER

Any User Name

Creates a new folder for the selected user on the memory device

(either for the administrator, or if the current user is selected)

“Add User”

The

ADD USER

button is visible only if the operation is allowed and no user

folder with the current user’s name exists.

Selected Item in Card List

Rename

Delete

Any User Name

Renames the selected user folder on the

memory device

(administrator only)

Deletes the selected user folder, including all

snapshots, from the memory device

(administrator only)

Rename

Renames the selected user folder on the memory device.

The keyboard appears and the user is prompted to enter a new folder name.

If there already exists a folder with the same name, a dialog box appears: “

user with the name ‘username’ already exists

”; if desired, confirm

with

Delete

Deletes the selected user folder from the memory device after having con-
firmed the dialog box “

Do you really want to delete the selected

user?

” with

Yes

If the selected folder is not empty, a dialog box “

The selected user cannot

be deleted. The user’s snapshots have to be deleted first

” appears.

If desired, confirm with

Selected Item in Card List

Rename

Delete

Any Snapshot

Renames the selected snapshot on the

memory device

(either for the administrator, or if one of the

current user’s own snapshots is selected)

Deletes the selected snapshot from the

memory device

(either for the administrator, or if one of the

current user’s own snapshots is selected)

Rename

Renames the selected snapshot on the memory device.

The keyboard appears and the user is prompted to enter a new snapshot name.

If there already exists a snapshot with the same name, a dialog box appears:
“

A snapshot with the name ‘snapshotname’ already exists. Do you

really want to rename the selected snapshot?

”. When continuing

with

Yes

, all parameter files of the existing snapshot will be deleted before

renaming all parameter files of the selected snapshot.

Delete

Deletes the selected snapshot from the memory device after having confirmed
the dialog box “

Do you really want to delete the selected snapshot?

”

with

Yes

All parameter files of the selected snapshot will be deleted.

Содержание OnAir 3000





















































































































































































































































































































































































Результаты поиска

Содержание OnAir 3000

Отзывы:

Похожие инструкции для OnAir 3000

Бренды по названию

Популярные бренды

Studer OnAir 3000, Руководство по эксплуатации

Результаты поиска

Содержание OnAir 3000

Отзывы:

Похожие инструкции для OnAir 3000

Бренды по названию

Популярные бренды