Studer OnAir 3000, Руководство по эксплуатации

Страница: 45 / 372

OnAir 3000 Digital Mixing Console
Operating Elements 4-5
SW V3.0 Date printed: 31.10.08
SEL
When pressing the Select key, the channel page is displayed on the main screen
module and shows the last active menu. There, the user can adjust parameters
for this channel or select a different page – either by the touch fields and/or
the rotary encoders below the main screen module, or by the PC mouse and
keyboard.
The SEL key is also used for channel selection in Partial Snapshots and MPX-
Members.
If a channel screen module is attached, a specific function in a channel can
directly be selected by touching the corresponding symbol on the channel
screen.
REC
The
REC
function is used to assign the channel signal directly to the record
bus, regardless of the fader position, the
ON
key, and the bus assignment. If
active, the key is lit in red.
Ÿ
TB
For N–X owner channels, this key’s function is
TB
(talkback) to the N–X
return. If more than one owner is configured to the same N–X output, all
corresponding
TB
keys work in parallel.
“
Joker
This key’s function can change dynamically, depending on the source
Key”:
routed to this channel, therefor it is also referred to as “Joker key”. Its func-
tions are configured in the corresponding input pages.
Examples:
If a telephone line is routed to this channel, the key’s function is
TB
, whereas
if a CD player is routed to this channel, its function is
LOC
.
The joker key can also be configured to act as a
TB / LOC
(locate) function,
sending a locate command from the GPO to a CD player. As soon as the CD
player is ready, it sends a corresponding signal to the GPI which illuminates
the key.
Fader
Since the audio path is fully digital, the signal does not pass through the
faders; linear-track mono faders with a stroke length of 100 mm are used.
When opening the fader, fader start or signaling commands can be released,
depending on the configuration.
Master Fader
Any fader can be configured as a master/group/N–X send fader.
If a channel screen module is present, it is clearly indicated on the screen
that the selected channel strip has a different function. The master function is
indicated in the channel label display as well, and the
LEVEL
LED bar graph
meter on the channel strip remains dark.
The
ON
key is disabled when the fader is configured as master fader for either
one of the master outputs, and the
PFL
function is enabled.
LEVEL
An LED bar graph meter is provided in each channel strip, either indicating
the input level, or the N–X or AUX send level of the channel. The top red LED
indicates an overload condition at analog inputs. This meter remains dark if
the channel is configured as master fader.
Input Level Indication:
It is configurable whether the meter displays the PF or AF signal of this chan-
nel. The value indicated on the meter is depending on the console’s headroom
setting (default value: 0 dB indication for –9 dB
FS
).
N–X or AUX send level indication:
In this mode the meter indicates the N–X
or AUX send level of the channel.
Line1 Line2 Line2 Line3 Line4 Line5 Line6