Stryker Operating Room Information System Скачать руководство пользователя страница 11

Страница: 11 / 56

Denotes Class 1
Class 1 Equipment: equipment in which the protection against electric shock does

not rely on Basic Insulation only, but includes an additional safety precaution in

such a way that means are provided for the connection of Accessible Conductive

Parts to Protective (ground) Conductor in the fixed wiring of the installation in such

a way that Accessible Conductive Parts cannot become Live in the event of a failure

of the Basic Insulation.
In accordance with European Community Directive 2002/96/EC on Waste Electri-

cal and Electronic Equipment, this symbol indicates that the product must not be

disposed of as unsorted municipal waste but should be collected separately.

Note:

The device does not contain any hazardous materials.

Legal regulations may include specifications regarding the disposal of this prod-

uct. We request that you contact Stryker when you plan to withdraw this device

from service for discard.

Denotes the device contains more than .002% cadmium.

Denotes the device contains more than .0005% mercury.

Denotes the device contains more than .004% lead.

Limited Availability - Equipment may not be available in all regions.

NSP

Not Stryker Provided - Doc Stations must be provided by the customer outside the

U.S.

3.1

EMC Precautions

This device is considered medical electrical equipment and requires special precautions regarding

EMC and needs to be installed and put into service according to the information provided.
Portable and mobile RF communications equipment can affect this device's performance and must be

used in accordance with the following information.

WARNING The use of accessories, transducers, or cables other than those specified,

with the exception of those sold by Stryker, may result in increased emis-

sions or decreased immunity of the equipment or system.

WARNING The equipment should not be used adjacent to or stacked with other equip-

ment. If stacking or adjacent placement is necessary, the equipment should

be observed to verify normal operation in the configuration in which it

will be used.

Содержание Operating Room Information System

























































Результаты поиска

Содержание Operating Room Information System

Отзывы:

Бренды по названию

Популярные бренды

Stryker Operating Room Information System, Руководство по предварительной установке

Результаты поиска

Содержание Operating Room Information System

Отзывы:

Бренды по названию

Популярные бренды