Stryker Berchtold CHROMOPHARE, Руководство по обслуживанию и запасным частям

Страница: 37 / 133

32
S
WARNING:
Failure to plug in the contacts correctly may result in permanently
damaged or destroyed connectors.
6. Insert the journal of the light bow (1) until it reaches the spring arm (2).
7. Screw in the shoulder screw (3) in until the light head is just un-braked.
8. Turn the lock bushing (4) 180° securing the shoulder screw.
9. Install the brake screw (1) into the free thread.
10. Adjust the braking force with the brake screw as such that the Light Head is easy to move but remains
stationary in the desired position.
7.9.3 New Flat Cardanic (N.F.C)
WARNING: When installing brake screws on a NC or NFC springarm, screw it in until it
stops then back it out ¼ turn (90°). Check to see if the component is stable. Loosen or
tighten accordingly, but never back this screw out more than 1 turn (360°) to prevent
it from falling out inadvertently.
1. Remove flat head brake screw (2).
2. Loosen the second allen head break screw but DO NOT remove.
3. Turn the locking bushing (3) 180° exposing the shoulder screw(1).
4. Remove the shoulder screw(1).
5. Install shipping lock to keep the spring arm at 90 degrees.
a. Slide the plastic sleeve forward and install the pin through arm.
b. Install circlip retainer.