Stryker altrix Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 66

Stryker altrix Скачать руководство пользователя страница 55

www.stryker.com

8001-009-001 REV G

51

Alarm conditions

The alarm rank establishes the order of presentation of the alarm on-screen message. The D in the table indicates the
alarm is deactivated during that mode. Maintenance and RFU modes are always in the deactivated mode and are not
listed in the table.

This product maintains the individual alarm status for all alarms as defined below.

•

Alarm condition present

•

Visual indicator state

•

Audible indicator state

•

Current timer for audio pause activation

•

Alarm rank per therapy mode

Alarm

Stand-by

Auto

Auto
Paused

Manual

Manual
Paused

Monitor

Remove from use

0

0

0

0

0

0

Power loss

D

1

1

1

1

1

Check patient probe

D

7

7

11

11

4

Patient probe malfunction

D

6

6

10

10

3

Probe disconnected

D

5

5

9

9

2

Patient temperature deviation

D

9

9

D

D

D

Water temperature deviation

D

D

D

7

D

D

Check water flow (all ports)

D

11

D

6

D

D

No water flow alarm (all ports)

D

4

D

4

D

D

No water

D

2

D

2

D

D

Therapy paused timed out

D

D

3

D

3

D

Normothermia deviation

D

D

D

D

D

5

Power backup level

1

19

19

14

14

6

Patient output deviation

D

22

22

17

17

7

Notes

•

If more than one alarm is active at the same time, the product maintains the active state for the individual alarm
including the audio pause timer. The screen alarms are displayed with the highest level alarm first with a page toggle
to allow the operator to scroll to the subsequent alarms.

•

The Paused in Auto Paused and Manual Paused refer to the Therapy Pause state.

Check patient probe alarm

This alarm notifies the operator that data provided by the probe is not normal or appears removed.

Notes

•

The product only activates the Check Patient Probe Alarm when met during an Active Therapy. Otherwise, the alarm
is disabled.

Alarm generation:

Primary patient temperature changes by more than 1.0° C within two minutes.

Note:

The product will deactivate the heat exchange and keep the pump activated as requested by the Active Therapy.

«
...
53
54
55
56
57
...
»

Содержание altrix



































































Отзывы:

Нет отзывов