Stryker altrix Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 66

Stryker altrix Скачать руководство пользователя страница 17

www.stryker.com

8001-009-001 REV G

13

Introduction

Product functions (Continued)

Icon

Name

Function

Increase

Increases the water or patient temperature by 0.1° for cooling or
warming temperature

Note:

Press and hold the increase button to move the

temperature up faster.

Decrease

Decreases the water or patient temperature by 0.1° for cooling or
warming temperature

Note:

Press and hold the decrease button to move the

temperature down faster.

Back

Returns to the previous screen or cancel an operation

Edit settings, Exit, or Cancel

Edit current settings, exit, or cancel

Confirm selection

Accepts the selected settings

Next or More

Changes to the next screen, option, or setting

Page indicators (may also
appear vertical)

Indicates that there is more than one page associated with the
screen topic for the page that is currently displayed

Settings

Displays the summary of the current, visual / audible, language,
or primary probe settings

Graph

Graphical display of the selected items such as patient
temperature, target temperature, water temperature, and power
level

Help

Displays contextual help screens for therapies, navigation,
buttons, and alarm screens. This button breathes to allow the
user to view the alarm screen.

Note:

If not specified above, make sure that you tap and release the buttons or icons for you selection to register with the

system.

Note:

The Light sensor (non selectable)

, dims or brightens the LCD based on the amount of light in the room.

Note:

¹

Breathe: The brightness of the button or icon will go to a low light and then increase to a bright light. This cycle

repeats.

Visual indicators

When the visual indicators are solid green, this indicates that the function is stabilized. The visual indicators breathe to
indicate that the controller is at the intermediate target.

«
...
15
16
17
18
19
...
»

Содержание altrix



































































Отзывы:

Нет отзывов