Stryker 0702-001-000 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 42

Stryker 0702-001-000 Скачать руководство пользователя страница 20

0702-002-700 Rev-S

EN

www.stryker.com

19

CAUTION:

ALWAYS use the correct power cord. Configurations may

vary.

e. Connect the rover to facility electrical power using the appropriate

power cord.

f. Push the power switch to the ON position.

g. Read the WARNING message on the control panel display, then

push the control panel display button next to OK to access the
CONTROL screen (Figure 21).

NOTE:

If the 4-liter or 20-liter suction limit setting dial is positioned

in the high suction range, the rover will provide an audible and visual
indication of this condition. See the

High Suction Indicator

section.

1f

1e

1d

1c

1b

1a

Figure 20 To Connect Power

WARNING

HIGH SUCTION DEVICE

DO NOT CONNECT DIRECTLY
TO CHEST TUBES OR OTHER
CLOSED WOUND DRAINS

OK

1g

Figure 21 High Suction Device Warning

2. To Prepare For Fluid Suction

(Figure 22)

NOTE:

The fluid suction tubing and suction accessory are applied

parts.

a. Install new disposable manifold(s) into the manifold port(s). Make

sure the manifold(s) are fully twisted and locked into place.
See the

instructions for use

supplied with the manifold for more

information.

b. Attach the fluid suction tubing to the port(s) of the installed

manifold(s). ALWAYS close unused manifold ports.

c. Attach a fluid suction accessory to the end of the suction tubing

if required.

d. Push the RESET VOLUME button to reset the fluid display level

value to zero if required.

e. If the RESET VOLUME button is pushed, a confirmation screen

will appear. Push the control panel display button next to OK to
reset the volume levels to zero (Figure 23).

2b

2d

2c

2a

Figure 22 To Prepare for Fluid Suction

PRESSING OK

WILL RESET BOTH

VOLUME LEVELS

TO ZERO

OK

ESC

NOTE

2e

Figure 23 To Reset Volume Level to Zero

0000016914, Rev. S Effective Date: Mar 11, 2016 9:46:10 AM

Printed Date: Feb 24, 2020 18:26:59 GMT

«
...
18
19
20
21
22
...
»

Содержание 0702-001-000











































Отзывы:

Нет отзывов