Stryker 0702-001-000 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 42

Stryker 0702-001-000 Скачать руководство пользователя страница 10

0702-002-700 Rev-S

EN

www.stryker.com

9

User/Patient Safety

WARNINGS:

Environmental/Biological

▪

FIRE HAZARD – DO NOT use this equipment in areas in which
flammable anesthetics or flammable agents are mixed with air,
oxygen or nitrous oxide. Failure to comply may cause a fire and
result in burn injury or property damage.

▪

BLOODBORNE PATHOGEN HAZARD

▪

The Bloodborne Pathogens Standard provided by the United
States Occupational Safety and Health Administration (US
OSHA 29 CFR 1910.1030) requires those with employees
having occupational exposure to potentially infectious
materials to establish a written Exposure Control Plan. The
Exposure Control Plan is designed to eliminate or minimize
employee exposure through use of personal protective
equipment (PPE), appropriate vaccinations (e.g. hepatitis B),
and other control measures.

▪

ALWAYS wear PPE when operating or handling this equipment.

▪

ALWAYS follow local regulations regarding proper handling and
disposal of biohazard waste.

Failure to comply may cause infection and result in healthcare
staff injury.

▪

ALWAYS clean the equipment as indicated upon initial receipt and
before each use. DO NOT place the rover within the sterile field.
Failure to comply may cause infection and result in patient or
healthcare staff injury.

▪

CONTAMINATION HAZARD

▪

DO NOT collect fluids from patients being treated with
radioisotopes or hazardous chemical agents.

▪

ALWAYS follow local regulations for safe handling, recycling,
and disposal of biohazard fluid waste and equipment. See

Disposal/Recycle

section.

Failure to comply may cause environmental contamination and
result in injury.

WARNINGS:

▪

The manifold is for SINGLE PATIENT USE ONLY. DO NOT sterilize
or reuse. DO NOT reuse, reprocess, or repackage a single use
device. A single use device is intended for a single use only. The
single use device may not withstand chemical, chemical vapor,
or high temperature sterilization reprocessing. Design features
may make cleaning difficult. Reuse may create a serious risk of
contamination and may compromise the structural integrity of the
device resulting in operational failure. Critical product information
may be lost if the device is repackaged. Failure to comply
may lead to infection or cross-infection and result in patient or
healthcare staff injury.

▪

ALWAYS make sure rover power is ON when collecting fluid
waste. The rover can only detect full canisters if the rover is ON.
If the rover is OFF, biohazard waste leakage or loss of suction
can occur.

0000016914, Rev. S Effective Date: Mar 11, 2016 9:46:10 AM

Printed Date: Feb 24, 2020 18:26:59 GMT

«
...
8
9
10
11
12
...
»

Содержание 0702-001-000











































Отзывы:

Нет отзывов