Strautmann Verti-Mix 1251-L, Перевод оригинальной инструкции по эксплуатации, Страница: 90 / 190

Commissioning
90 Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
5.12.2 Set conveyor speed via control set
Set the conveyor speed via the control dial (1) on
the control set. Pointer (2) indicates the scale
value for the set conveyor speed:

Scale value 0 = lowest conveyor speed,

Scale value 10 = highest conveyor speed.
Fig. 51
5.12.3 Set control dial range of E-control set
The E-control set provides you with the option to adapt the control
range of the control dial and thus the drive speed of the conveyor
(crossover conveyor, side discharge conveyor, conveyor extension
or C-conveyor) to your needs.
The control dial is factory-set such that in normal operating mode
the conveyor slowly starts to run in position 2 and approximately
reaches its maximum drive speed in position 10.
WARNING Risk of becoming entangled, being drawn in and wound up by
the running crossover conveyor, side discharge conveyor,
conveyor extension or C-conveyor!
Make sure that people or animals leave the hazardous area of the
conveyor before powering the conveyor.
Immediately switch the conveyor off if people or animals enter the
hazardous area of the conveyor.
1. Hitch the machine to the tractor:
1.1 Couple drawbar.
1.2 Connect hydraulic flow line and
return line.
1.3 Connect control set of the E-
control.
2. Secure tractor and machine against
rolling.
3. Insert the blade of a screwdriver into the
slit (1) on the right-hand side of the
control set and force open the casing by
pressing the screwdriver handle
outwards.
The casing of the control set can
only be completely folded open on
the right-hand side.
Fig. 52