Strautmann Verti-Mix 1251-L, Перевод оригинальной инструкции по эксплуатации, Страница: 122 / 190

Service and maintenance of machine
122 Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16
9 Service and maintenance of machine
Regular and proper service and maintenance:

will keep your machine ready for use for a long time and avoid early wear,

will reduce downtimes and repairs,

is a precondition for our warranty provisions.

When carrying out service and maintenance work on the
machine, additionally observe the information included in the
following chapters:

"
Operator’s obligation", page 32,

"Qualification of operator", page 33,

"Basic safety instructions", page 35,

"Warning and instruction signs", page 43.
Observance of these chapters serves your safety.

Only use original spare parts.

Observe environmental measures when carrying out service and
maintenance work on the machine.

Observe legal provisions when disposing of operating materials
such as oils and greases. These legal provisions also apply to
parts having come into contact with those operating materials.

As a basic principle, disconnect all electrical / electronic plug
connections before carrying out service and maintenance work
on the machine. This shall particularly apply to welding work.

It is necessary to take protective measures such as covering
power supply lines, hydraulic hose pipes, brake and supply lines
or removal of such lines at particularly critical spots:

when carrying out welding, drilling and grinding work,

when carrying out work by means of cutoff wheels in the
vicinity of these pipes and lines
.

Check brake lines, air pipes and hydraulic hose pipes with
special care for visible defects.

Special know-how is required for carrying out testing and
maintenance work. This know-how is not imparted by these
operating instructions.

The maintenance intervals depend on the frequency of use of
your machine. The maintenance plan has been tailored to
medium axle loads and stress exerted on the brakes.
In case of higher loads and amount of stress, maintenance work
must be carried out at respectively shorter intervals. This shall in
particular apply to the brakes and chassis.

Modifications to the maintenance instructions shall be reserved!