Strautmann Verti-Mix 1251-L, Перевод оригинальной инструкции по эксплуатации, Страница: 109 / 190

Use of machine
Verti-Mix 951-1651, Verti-Mix 951-L, 1251-L, Verti-Mix 1501 D-3101 D 05.16 109
7. Switch the weighing device on and start the
programme (if available).
8. Make sure that people leave the area where
the fodder mixing wagon is filled.
9. Switch the tractor's p.t.o. shaft on.

The mixing auger starts.
10. Let the tractor engine run at appropriate
speed to ensure that the tractor engine runs
equally and does not stall when the mixing
container is being filled.
11. Fill the mixing container by means of a
tractor equipped with a front loader or by
means of a wheeled / yard loader.
7.1.1 Recommended filling order

For undoing round or cuboid bales, a higher power is required.
The required power can be reduced by means of a two-level
switchgear (gear level II).

Recommended procedure for processing round or cuboid bales:
1. Extend the counter-cutters into the mixing container.
2. Fill round or cuboid bales in at slow mixing auger driving
speed.
3. Increase the driving speed of the mixing auger after the
bale has been "undone".
4. Now retract the counter-cutters from the mixing container.
1. Fill highly-structured fodder components (hay, straw etc.) in with the mixing auger powered.
Have them possibly mixed for a short time before filling in the next component. A longer mixing
ensures better chopping of the long stalks.
2. Fill in grass silage.
3. Fill in maize silage, grain silage.
4. Fill in concentrated feed, grain feed etc.
5. Fill in mineral feed by means of the loading tool (shovel), through the feed funnel (optional
extra) or via a conveyor system.
6. Fill in fodder components with a high proportion of water, e.g. draff, potato pulp or beet chips.
7. Fill liquid components such as liquid yeast, molasses into the mixing container by means of the
loading tool together with the last portion of maize silage.