Stratus ftServer 2900 Series, Планирование и руководство по установке

Страница: 121 / 148

System Specifications A-1
Appendix A
System Specifications
A-
For system specifications, see:

“System Specifications” on page A-1

“PCIe Adapter Specifications” on page A-6

“AAP87600 PDU Specifications” on page A-7
N O T E S
1. The system temperature and humidity requirements
defined in Table A-2 are the minimum requirements
the site must provide.
2. For ftScalable Storage G3 systems, the temperature
and humidity requirements are provided in the
ftScalable Storage G3: Getting Started Guide (R687).
3. For ftScalable Storage G4 systems, see the link in the
ftScalable Storage G4 System Documentation
section in the Preface for temperature and humidity
requirements.
System Specifications
The following figures show front and rear views of the systems.

Figure A-1 shows the front of an ftServer 2900, 4900, or 6900 system, mounted in
a rack with its bezel pulled forward.

Figure 10-1 shows the rear of a rack-mountable ftServer 2900, 4900, or 6900
system, specifying the locations of the connectors at the rear of the system.
Table A-1 lists the dimensions of the system cabinets supplied by Stratus. Table A-2
lists the specifications for each ftServer CPU- I / O enclosure, the front panel, and the
backplane assembly.
Table A-4 lists the specifications of the PDU.
For the specifications of ftScalable Storage G3 systems, see the ftScalable Storage
G3: Getting Started Guide (R687).