Eden260V User Guide
6 Operating and Maintaining the Printer
DOC-32020 Rev. F
6-51
23.Remove all objects from the printer and close the cover. Confirm that you
have done so, and click
Next
.
Figure 6-72 Cleared-tray confirmation screen
Before using the printer to produce models, you should calibrate the heads and
check their alignment.
Figure 6-73 Final wizard screen after successfully replacing print heads
Installation Problems
If the printer detects that there is a problem after you install print heads, a
relevant warning screen appears.
➢
If the printer software does not detect the replaced head:
If this happens:
a. Open the print head compartment (see Figure 6-61 on page 6-46).
b. Re-insert the print-head driver card into its socket (see Figure 6-65 on
