Eden260V User Guide
6 Operating and Maintaining the Printer
DOC-32020 Rev. F
6-26
9. Clean the orifice plates, with a back-and-forth motion (see Figure 6-27). Use
the mirror to make sure that you have removed all of the residue material.
Figure 6-27
Cleaning the heads
10.Clean the entire roller surface, by rotating it as you clean.
Use this opportunity to clean the glass lens on the UV lamps using the
supplied sanding sponge.
11. When you have finished cleaning, select the confirmation check box in the
wizard screen (see Figure 6-26) and click
Next
.
12.Remove the cleaning materials from the printer and close the cover.
13.Select the confirmation check boxes in the wizard screen and click
Next
.
The head-purge cycle begins. When the process is complete, click
Done
in
the final wizard screen.
Figure 6-28 Final wizard screen
