Stratasys Eden260V, Руководство пользователя

Страница: 145 / 202

Eden260V User Guide 6 Operating and Maintaining the Printer
DOC-32020 Rev. F 6-31
Improving Print Quality
If you suspect that print quality is poor, perform the Pattern Test (see "Pattern
Test" on page 6-29). If the results are poor, use the following procedure to
improve print quality.
If the results of the last pattern test are poor:
1. From the Options menu, select Purge Sequence , or press F4 .
2. In the confirmation dialog box, click Yes .
The print heads are purged of Model and Support material, and the wiper
removes excess material from them.
3. Repeat the purge sequence.
4. Perform the pattern test.
If the results of the pattern test are still poor:
1. Manually clean the print heads (see "Cleaning the Print Heads and the
Roller" on page 6-24).
2. Perform the purge sequence.
3. Perform the pattern test.
If the results of the pattern test are still poor:
1. Carefully clean the print heads again, making sure there is no residue left on
them.
2. Perform the purge sequence.
3. Perform the pattern test.
If the results of the pattern test are still poor:
➢
Optimize the print heads and replace faulty print heads, if necessary (see "
Calibrating Print Heads" on page 6-41).
Cleaning the Roller Waste Collector and Inspecting the Roller Scraper
The roller waste collector removes waste material scraped from the roller.
Suction removes this waste to the printer’s waste container.
This assembly should be cleaned weekly to prevent a blockage in the tubes
leading to the waste container, so that waste material does not overflow into the
printer.