Eden260V User Guide
6 Operating and Maintaining the Printer
DOC-32020 Rev. F
6-33
5. Loosen the two screws securing the suction tube on the print block.
Figure 6-38 Lifting the suction tube
6. Lift the suction tube to secure it in a raised position.
7. Remove the two screws securing the covering of the roller waste collector
and remove it.
Be very careful to save the covering screws. These are special screws; if they
are lost, you need to order replacements.
Figure 6-39 Removing the roller waste collector screws
8. Remove the covering by pulling it out, and then lower it.
