Eden260V User Guide
6 Operating and Maintaining the Printer
DOC-32020 Rev. F
6-11
You cannot continue printing the model if:
• The number of the last slice printed does not appear in the printer interface,
even if the server computer displays the
Continue from Slice
confirmation
dialog box.
• There was a relatively long interruption in printing, even if the “last slice” and
“continue from slice” indicators are correct. This is because the part already
printed might slightly deform or shrink before printing continues, causing a
visible difference between it and the part of the model printed later. The
effects of a printing stoppage depend on the model size and structure, the
Model material used, ambient temperature and the length of the stoppage.
If you cannot continue printing:
6. Remove the partially printed model from the build tray.
7. Restart the job from the
Job Manager
screen (in Objet Studio).
You can stop and later resume printing from either the printer interface or the
Job Manager
screen of Objet Studio. After clicking the
Stop
button on the
printer interface, you can resume printing only from the
Job Manager
screen.
However, after clicking the
Pause
button in the printer interface, you can only
resume printing from the printer interface.
