Eden260V User Guide
6 Operating and Maintaining the Printer
DOC-32020 Rev. F
6-14
6. In the
Flushing Options
screen, choose the appropriate cycle for the Model
material you want to install.
Figure 6-11 Flushing options
❒
Economy.
During this cycle, which takes about 20 minutes, the pump
purges the Model material from the print block, then flushes the system
with the new material.
Since traces of the previous material may be present in the first models
printed with the new material, this cycle is usually acceptable when
replacing a light-colored Model material with a darker material (such as
TangoBlack™ or VeroBlack™), or if the exact color of the printed models
is unimportant. In most cases, models will have the mechanical properties
of the new material (except when switching between rigid and flexible
materials).
❒
High-performance
. During this cycle, which takes about 55 minutes, the
wizard cleans the feed tubes and print block more thoroughly, compared
to the
Economy
cycle, by flushing the system with more material.
This cycle ensures that models will have both color and mechanical
properties of the new material. This is important when replacing a dark-
colored material (such as VeroBlack or TangoBlack) with a lighter-
colored material, and when switching between rigid and flexible materials.
This cycle is also recommended when changing the type of Support
material.
