Stratasys Eden250, Руководство пользователя

Страница: 99 / 122

DOC- 22000 Rev. A
7–23
Eden250 User Guide
The first in a series of alignment screens appears (Head M1).
Figure 7-32:Head alignment screen
11. In the head ‐ alignment screen, select the number that indicates which
lines align in the upper and lower rows of a pair on the transparency
(counting from the left) for this print head.
Note:
Because the alignment of the fourth lines is optimum, the
number “4” is selected, by default, in the wizard screen. This does not
change the head alignment. If you select other numbers, the wizard
adjusts the head alignment, accordingly.
12. Click
Next
to display the next head alignment screen, and again select
the number representing the most closely aligned vertical lines on the
transparency for that print head.
When you have finished aligning all of the heads, the following screen
is displayed.
Figure 7-33:Updating System Parameters confirmation screen