Stratasys Eden250, Руководство пользователя

Страница: 105 / 122

DOC- 22000 Rev. A
7–29
Eden250 User Guide
15. Make sure that along with the head, you remove the two rubber O ‐ ring
seals.
Figure 7-43:O-ring seals on the head housing
Figure 7-44:Making sure the O-rings are not stuck to the print block
Installing the
New Head
16. Inspect the replacement head, and make sure that the O ‐ ring seals are
in place (see figure 7 ‐ 43).
17. Gently insert the replacement head into the vacant slot in the print
block, and push the printing ‐ head driver card into its socket.
Note: Make sure to insert the head with driver card facing its socket, in the
rear of the print block.
Figure 7-45:Inserting the printing-head driver card into its socket
Important : If the seals are not removed with the head, they are probably
stuck to the print block housing. If so, remove them.