Stratasys Eden250, Руководство пользователя

Страница: 102 / 122

Operating & Maintaining the Eden 3-D Printer
7–26
DOC- 22000 Rev. A
Preparing the
print block
5. Select the head(s) needing replacement, and click
Next
.
Figure 7-35:Head selection screen
The Eden printer heats and empties the heads. (This should take about
10 minutes.)
Figure 7-36:Emptying Block progress screen
6. When the print block is completely drained, click
Next
.
7. Take note of the warning screen that appears (see figure 7 ‐ 37). To
prevent damage to the print block, you must install the new head
immediately after removing the defective one. Click
Next
if you are
ready to continue.
Figure 7-37:Head Replacement warning screen