Stratasys Eden250, Руководство пользователя

Страница: 54 / 122

Using Objet Studio
5–20
DOC- 22000 Rev. A
To choose the finish type for a model:
1. Select the model.
2. In the Options tab of the Entity Properties dialog box, select
Matte
or
Glossy
.
or—
1. Right ‐ click the model on the build tray.
At the bottom of the pop ‐ up menu, the current finish type is not
enabled (that is, you cannot select it).
2. To change the finish type, select the other (enabled) option.
Note: To distinguish between models with different finishes, the color of
objects displayed on the build tray—when they are not selected—is
different for each type. To view and change the color settings, see “Object
Color Codes” on page 5-21.
Quality/Speed
Setting
Objet Studio allows you to choose the quality/speed setting most suitable
for your project.
High Quality—
•
Prints models with layers as thin as 16 microns, suitable for producing
fine details and delicate items.
•
Requires much more time to print most trays, compared to High Speed
setting.
High Speed—
•
Prints models with layers as thick as 29 microns, suitable for producing
larger models that do not contain fine details or delicate parts.
•
Requires much less time to print most trays, compared to High Quality
setting.
Change the setting, if necessary, before sending the tray to the 3 ‐ D printer.
Figure 5-26: Quality/Speed setting
Handling Completed Trays
After you have properly placed all objects on the build tray, you save the
tray as an otf file, which is sent to the 3 ‐ D printer for production. But before
saving the tray, you can check that there would be no problem producing it.
You can also calculate how much material would be consumed during
production and how much time this would take.
Tray Validation
Before sending a job to the Eden printer for production, you should check
that the tray is “valid” and can be printed.
Note: Because of the unique characteristics of each type of modeling
material, make sure that the correct material is selected
before
performing Tray Validation.