Stratasys Eden250, Руководство пользователя

Страница: 108 / 122

Operating & Maintaining the Eden 3-D Printer
7–32
DOC- 22000 Rev. A
Installation
Problems
•
If the Eden software does not sense the replaced head, the following
warning screen appears.
Figure 7-51: Incorrect-installation screen, showing which head(s) to re-insert
If this happens:
a. Open the printing head compartment (see figure 7 ‐ 41 on page 7 ‐ 28).
b. Re ‐ insert the printing ‐ head driver card into its socket (see
figure 7 ‐ 45 on page 7 ‐ 29).
c. In the wizard screen, select the check box to confirm that you have
re ‐ inserted the card, and click
Next
.
•
If the replacement head was not factory calibrated, the following
warning screen appears.
Figure 7-52: “No factory data” warning screen
If this happens:
a. Remove the head and replace it with another one (starting with step
11 on page 7 ‐ 27).
b. In the wizard screen, select the check box to confirm that you have
installed another printing head, and click
Next
.
c. Contact customer support abo
u
t the uncalibrated head.