Stratasys Eden250, Руководство пользователя

Страница: 85 / 122

DOC- 22000 Rev. A
7–9
Eden250 User Guide
3. From the drop ‐ down menu, choose the type of model material (resin)
you want to install, and click
Next
.
Figure 7-9: Resin Selection screen
Note: This selection automatically affects the resin setting in Objet Studio.
4. In the Resin Replacement Cycle screen, choose the appropriate cycle for
the model material you want to install. Two options are available,
depending on the new model material to be used:
•
Short Cycle , for changing to a darker and more opaque material.
During this cycle, which takes about 25 minutes, the air valve is
opened, and the pump purges the material from the feed tube and
printing block.
•
Long Cycle , for changing to a lighter and more transparent material.
During this cycle, which takes about 60 minutes, the feed tube and
printing block are flushed with a cleansing solution after being
purged of the current material.
Figure 7-10: Resin Replacement Cycle screen
Note: The short cycle does not require user intervention. The long cycle,
however, requires user presence to replace material cartridges in the
printer.