Stratasys Eden250, Руководство пользователя

Страница: 97 / 122

DOC- 22000 Rev. A
7–21
Eden250 User Guide
5. Place the transparency on the build tray, next to its left and rear edges,
as shown in the following figure.
Figure 7-28:Positioning the transparency on the build tray
6. Make sure that the transparency sheet is lying flat, and tape it to the
tray.
7. In the wizard screen, select the check box to confirm that the
transparency sheet is placed on the build tray, and click
Next
.
The Eden printer prints the head alignment test on the transparency.
8. When the following screen appears, remove the transparency.
Figure 7-29:Head Alignment wizard—steps 8–10