Stratasys Eden250, Руководство пользователя

Страница: 57 / 122

DOC- 22000 Rev. A
5–23
Eden250 User Guide
3. In the Split Object dialog box, enter the values to determine how Objet
Studio will divide the object. You can divide an object along any of its
axes, by entering either exact measurements or the number of parts.
Figure 5-30: Split Object dialog box
4. In Save to Folder , enter the folder name.
5. Click
OK
.
The composite parts are saved as new stl files with “Part 1,” “Part 2,”
etc., added to the original file name.
Note: Before printing the newly created stl files, it is recommended that you
check them for defects in an STL-repair application, such as Magics ,
by Materialise.
Choosing the
Support
Strength
When producing models, support material fills some hollow and empty
sections (see “Model Orientation” on page 5 ‐ 9). Objet Studio allows you to
adjust the strength of the structure formed with the support material. This
adjustment is useful when producing either large/massive models or small/
delicate models. For most purposes, the default setting provides adequate
support strength.
To change the strength of the support structure used when printing a
model:
1. Select a model on the build tray.
2. In the Options tab of the Entity Properties dialog box, click
Advanced
.
The Advanced Properties dialog box opens.
Figure 5-31: Advanced Properties dialog box—Grid Style selection