Stratasys Eden250, Руководство пользователя

Страница: 58 / 122

Using Objet Studio
5–24
DOC- 22000 Rev. A
3. In the Grid Style section, choose the support strength suitable for the
selected model:
•
Heavy
—for large models needing much support.
•
Lite
—for delicate models needing little support.
• Default
—for models needing average support (most models).
Note: You can select a different support strength for each model on the
build tray.
4. Close the Advanced Properties dialog box.
Displaying the
Cross Section
of Objects
The Section feature enables you to view the interior of an object by “slicing”
it on any axis. You can then manipulate the object to inspect the interior
from different angles. This may be important for deciding on the type of
support necessary when producing the model (see “Choosing the Support
Strength ” on page 5 ‐ 23). Displaying an object’s cross section only affects
how the tray is displayed on the screen; it does not change the object itself.
To display a cross section of the tray:
1. From the Tools menu, select
Section
.
or—
Click on the toolbar.
The Section dialog box opens.
Figure 5-32: Section dialog box
2. Select the Enable Clicking check box.
3. Use the slider controls for the X ‐ , Y ‐ , and Z ‐ axes to cut the tray so that
you see the cross section you want.
The Lock Orientation option is not connected to the Grid Style selection.
This setting is described in “Freezing an Object’s Orientation” on page 5-16.
Figure 5-33: Whole view Figure 5-34: Cross-section view, after
using the Z-slider