StoneAge PROPOSITIONER PROP-DBP, Руководство пользователя

Страница: 18 / 56

18
866-795-1586 • WWW.STONEAGETOOLS.COM
SUB-ASSEMBLY 4 (CONTROL BOX AND CAMERA)
CONNECT THE MONITOR MOUNT, MONITOR AND POWER PACK TO
THE CONTROL BOX
1. Attach the Monitor to the Monitor Mount Assembly with the supplied
screws, washers, and wing nuts as shown in (Figure 18). Tighten by
hand.
2. Loosen the thumb screws on the Controller box and Monitor Mount.
Remove the Controller Box from the stand and slide the Monitor Mount
on.
(Figure 19) Return the Controller Box to the Stand and tighten
the Thumb Screw. The Monitor Mount collar should sit just under the
Controller Box Collar.
3. Hang the Power Pack by the handle from the Monitor Mount (Figure 20)
4. Plug the cable coming from the Monitor into the “OUTPUT” port and the
Camera Cable into the “INPUT 1” port on the side of the Power Pack
(Figure 21) INPUT 2 would be for an additional camera.
FIGURE 20 FIGURE 21
FIGURE 18
Monitor Mount
Assembly
Monitor
Power
Pack
Output
Port
Input 1
Port
FIGURE 19
Stand
Thumb
Screws
SUB-ASSEMBLY 5 (OPTIONAL DUMP SYSTEM SET-UP)
Controller
Box