StoneAge PROPOSITIONER PROP-DBP Скачать руководство пользователя страница 20

Страница: 20 / 56

866-795-1586 • WWW.STONEAGETOOLS.COM

PROPOSITIONER ATTACHMENT TO DOMED BUNDLE

POSITIONER STEP BY STEP SET-UP INSIDE THE DOMED BUNDLE

TECH TIP

It is highly recommended to put five necessary tools in a tote for the
installer to take inside the dome.
•

Tape Measure

•

1/2” Ratcheting Socket Wrench

•

3/4” Ratcheting Open-End Box Wrench (QTY. 2)

•

Wrenches specific to the Banshee for installation of the tool on lance.

INSTALL SPIDER PLATE ONTO TUBE FACE

1. Loosen the four bolts on the legs of the Spider Plate Assembly with a

3/4” Ratcheting Open-End Box Wrench

so the legs are free to slide in

the slots of the Hub Plate but do not come off.

(Figure 24)

2. Loosen the Expansion Plugs (x4) on each leg with the adjustable knobs.

(Figure 24)

ICM (TOP MOUNT) DOMED BUNDLE

DELTA-T (SIDE MOUNT) DOMED BUNDLE

Man Way

Legs (x4)

Loosen

3/4” Wrench

Loosen

3/4” Wrench

Adjustable

Expansion

Plug (x4)

SPIDER PLATE ASSEMBLY

FIGURE 24

FIGURE 26

FIGURE 25

3. Hand the Spider Plate Assembly through the Man Way to someone

positioned inside the Domed Bundle.

(Figures 25 & 26)

WARNING

The first four exchanger tubes the Expansion Plugs

will be inserted into must be free of debris. Follow all

workplace safety procedures and utilize appropriate

PPE when cleaning out the exchanger tubes prior to

plug installation to avoid injury.

Содержание PROPOSITIONER PROP-DBP
























































Результаты поиска

Содержание PROPOSITIONER PROP-DBP

Отзывы:

StoneAge PROPOSITIONER PROP-DBP, Руководство пользователя, Страница: 20 / 56

Результаты поиска

Содержание PROPOSITIONER PROP-DBP

Отзывы: