StoneAge PROPOSITIONER PROP-DBP, Руководство пользователя

Страница: 15 / 56

15
866-795-1586 • WWW.STONEAGETOOLS.COM
FIGURE 15
Adjustable
Handle
Optimal
Camera
Position
Range
Guide
Tube
Loosen
FIGURE 10
SUB-ASSEMBLY 1 (ABX-PRO, ROLLERS, COLLET BLOCK, AND GUIDE TUBE)
SUB-ASSEMBLY 2 (LINEAR DRIVE HANDLE)
INSTALL THE CAMERA MOUNT ANGLED GUIDE TUBE
4. Loosen the adjustable handle on the Camera Mount and
slide it up the guide tube.
5. Orient the Camera as shown and tighten the adjustable
handle when in place. The Camera has a wide viewing area,
but may need to be repositioned on the Guide Tube after
the whole assembly is complete.
(Figure 10)
Set This Assembly aside when complete.
PROP 339
Washer
Blue Goop ®
or
equivalent
anti-seize
PROP 337
Handle
REMOVE
PROP 336
Handle Assembly
5mm
Hex Key
REPLACE THE ADJUSTABLE HANDLE ON THE LINEAR DRIVE
1. Remove the PROP 336 Handle Assembly with a 5mm Hex
Wrench. (Figure 11)
2. Lightly coat the threads of the PROP 337 Handle with Blue
Goop
®
or other equivlent anti-seize.
3. Install the PROP 339 Washer with PROP 337 Handle by hand
screwing it into the clamp block until it is tight. (Figure 12)
Set This Assembly aside when complete.
FIGURE 11 FIGURE 12