StoneAge PROPOSITIONER PROP-DBP, Руководство пользователя

Страница: 19 / 56

19
866-795-1586 • WWW.STONEAGETOOLS.COM
WARNING
Always use Hose Whip Restraints. Failure to do so can result
in severe injury and/or death. It is the responsibility of the user
to properly install the Hose Whip Restraints. Never exceed safe
working load. Follow manufacturer’s recommendations and
ratings.
OPTIONAL PNEUMATIC DUMP CONTROL CONNECTIONS
StoneAge recommends the use of some kind of dump valve for all
waterblasting operations. We offer a variety of dump valve options.
The included Control Box has a Hand Controlled Dump Lever on
the Control Panel. A Foot Dump can be used instead of the Hand
Control. See the respective connection diagrams below for either
option.
FOOT CONTROLLED DUMP CONNECTION (Figure 28)
1. Install the hose with the female JIC ends between the Ball Valve
with the male 90°JIC Fitting located on the side of the Control
Box and the fitting marked “SUPPLY”on the Foot Dump Valve
Control.
2. Install the 1/4 in. (6 mm) O.D. Poly Tubing between the fitting
on the
Pneumatic
Dump Valve Assembly and the fitting marked
“DUMP”on the Foot Dump Valve Control.
3. Install the Main Water Supply and Flex Lance Hose onto the
Pneumatic Dump Valve Assembly. Be sure to use the appropriate
anti-seize, thread lubricant, and/or pipe tape as recommended
in the StoneAge Tool Fittings and Accessories Catalog at the link
below.
FIGURE 22
1/4 in. (6 mm)
O.D. Tubing
Foot Dump Control
“Supply” “Dump”
Pneumatic
Dump Valve
Assembly
Hose Whip
Restraint
Flex Lance
Main Water
Supply Hose
from pump
Ball Valve with
90°JIC Fitting
HAND CONTROLLED DUMP CONNECTION (Figure 29)
1. Install the 1/4 in. (6 mm) O.D. Tubing between the Push Connect
Fitting located on the back of the Control Box and the Push
Connect Fitting on the Pneumatic Dump Valve Assembly.
2. Install the Main Water Supply and Flex Lance Hose onto the
Pneumatic Dump Valve Assembly. Be sure to use the appropriate
anti-seize, thread lubricant, and/or pipe tape as recommended in
the StoneAge Waterblast Catalog.
FIGURE 23
1/4 in. (6 mm)
O.D. Tubing
Pneumatic
Dump Valve
Assembly
Hose Whip
Restraint
Flex Lance
Main Water
Supply Hose
from pump
Push
Connect
Fitting
SUB-ASSEMBLY 5 (OPTIONAL DUMP SYSTEM SET-UP)
DANGER
Keep dump connections neat and out of the foot path. Pinching
the dump connections will cause the dump valve to function
incorrectly, possibly leaading operator injury or death.
https://stoneagetools.com/assets/pdf/catalogs/waterblast_2020/2020_Waterblast_Catalog_web_spreads.pdf