24
866-795-1586 • WWW.STONEAGETOOLS.COM
PROPOSITIONER ATTACHMENT TO DOMED BUNDLE
PROPOSITIONER ATTACHMENT TO DOMED BUNDLE
INSTALL SUB-ASSEMBLY 1 ON THE LINEAR DRIVE
CAUTION
The ABX-PRO, Guide Tube, Collet Block, sub-assembly is heavy.
Use caution when handing it through the man way.
18. Hand Sub-Assembly 1 through the man way to the person
positioned inside the Domed Bundle.
19. Loosen the Clamp Block on the Linear Drive by pulling the Clamp
Handle out and rotating it counterclockwise.
(Figure 35)
20. Insert the Slide Block on the ABX-PRO sub-assembly into the
clamp on the Linear Drive.
(Figure 36)
21. The end of the Guide tube should be at least 3/4”-1” (19-25mm)
from the Tube Face. This is to avoid dragging on the surface of the
Tube Face.
(Figure 37)
22. Tighten the Clamp Handle on the Linear Drive when the Guide
Tube is set the proper distance off the tube face.
(Figure 36)
FIGURE 35
FIGURE 36
FIGURE 37
3/4”-1”± (19-25mm±)
Guide
Tube
Loosen
Clamp
Handle
Clamp
Block
Slide
Block
Clamp
Handle
Tube Face
Содержание PROPOSITIONER PROP-DBP
