background image

55

866-795-1586 • WWW.STONEAGETOOLS.COM

Warranties set forth herein extend only to End-Users, meaning customers 
acquiring, or that have previously acquired, a product manufactured by 
StoneAge (“Product”) for their own use and not for resale, either directly from 
StoneAge Inc. (“StoneAge”) or from a StoneAge Authorized Dealer or Reseller 
(“Dealer”).  No warranty of any kind or nature is made by StoneAge beyond 
those expressly stated herein.  

1. 

LIMITED WARRANTY PERIOD.

  Subject to the limitations and conditions 

hereinafter set forth, StoneAge warrants its Product to be free from defects 
in workmanship and material for a period of one (1) year from the date of 

purchase by the End-User, provided that the end of the limited warranty 
period shall not be later than eighteen (18) months from the date of shipment 
of the Product to the Dealer or the End-User by StoneAge (“Limited Warranty 
Period”).  All replacement parts which are furnished under this Limited 
Warranty and properly installed shall be warranted to the same extent as 
the original Product under this Limited Warranty if, and only if, the original 
parts were found to be defective within the original Limited Warranty Period 
covering the original Product.  Replacement parts are warranted for the 
remainder of the original Limited Warranty Period.  This Limited Warranty 
does not cover any component part of any Product not manufactured by 
StoneAge.  Any such component part is subject exclusively to the component 
manufacturer’s warranty terms and conditions.

2. 

LIMITED WARRANTY COVERAGE. 

 StoneAge’s sole obligation under 

this Limited Warranty shall be, at StoneAge’s option and upon StoneAge’s 
inspection, to repair, replace or issue a credit for any Product which 
is determined by StoneAge to be defective in material or workmanship.  
StoneAge reserves the right to examine the alleged defective Product to 

determine whether this Limited Warranty is applicable, and final determination 
of limited warranty coverage lies solely with StoneAge.   No statement or 
recommendation made by a StoneAge representative, Dealer or agent to End-

User shall constitute a warranty by StoneAge or a waiver or modification to 
any of the provisions hereof or create any liability for StoneAge.    

3. 

WARRANTY SERVICE PROVIDERS.

  Service and repair of the Product 

is to be performed only by StoneAge authorized service representatives, 
including Dealers who are authorized repair centers, with StoneAge approved 
parts.  Information about StoneAge authorized service representatives can 
be obtained through the StoneAge website at www.stoneagetools.com/
service.  Unauthorized service, repair or modification of the Product or use of 
parts not approved by StoneAge will void this Limited Warranty.  StoneAge 
reserves the right to change or improve the material and design of the Product 

at any time without notice to End-User, and StoneAge is not obligated to make 
the same improvements during warranty service to any Product previously 
manufactured.

4. 

WARRANTY EXCLUSIONS.

  This Limited Warranty does not cover, and 

StoneAge shall not be responsible for the following, or damage caused by 
the following:  (1) any Product that has been altered or modified in any way 
not approved by StoneAge in advance in writing; (2) any Product that has 
been operated under more severe conditions or beyond the rated capacity 
specified for that Product; (3) depreciation or damage caused by normal 
wear and tear, failure to follow operation or installation instructions, misuse, 
negligence or lack of proper protection during storage; (4) exposure to fire, 
moisture, water intrusion, electrical stress, insects, explosions, extraordinary 
weather and/or environmental conditions including, but not limited to lightning, 
natural disasters, storms, windstorms, hail, earthquakes, acts of God or any 

other force majeure event; (5) damage to any Product caused by any attempt 

to repair, replace, or service the Product by persons other than StoneAge 
authorized service representatives; (6) costs of normal maintenance parts 
and services; (7) damage sustained during unloading, shipment or transit of 
the Product; or (8) failure to perform the recommended periodic maintenance 
procedures listed in the Operator’s Manual accompanying the Product.   

5. 

REQUIRED WARRANTY PROCEDURES.

  To be eligible for warranty 

service, the End-User must:  (1) report the Product defect to the entity where 
the Product was purchased (i.e. StoneAge or the Dealer) within the Limited 
Warranty Period specified in this Limited Warranty; (2) submit the original 
invoice to establish ownership and date of purchase; and (3) make the Product 
available to a StoneAge authorized service representative for inspection to 

determine eligibility for coverage under this Limited Warranty.  This Limited 

Warranty shall not extend to any person or entity who fails to provide proof of 

original purchase from StoneAge or a Dealer.  No Product may be returned for 
credit or adjustment without prior written permission from StoneAge.   

6. DISCLAIMER OF IMPLIED WARRANTIES AND OTHER REMEDIES.   
EXCEPT AS EXPRESSLY STATED HEREIN (AND TO THE FULLEST EXTENT 

ALLOWED UNDER APPLICABLE LAW), STONEAGE HEREBY DISCLAIMS 
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT 

LIMITATION ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE, AND ANY AND ALL WARRANTIES, 
REPRESENTATIONS OR PROMISES AS TO THE QUALITY, PERFORMANCE 
OR FREEDOM FROM DEFECT OF THE PRODUCT COVERED BY THIS 
LIMITED WARRANTY.  STONEAGE FURTHER DISCLAIMS ALL IMPLIED 
INDEMNITIES.

7. 

LIMITATION OF LIABILITY.

  End-User specifically acknowledges that the 

Product may be operated at high speeds and/or pressures, and that as such it 
may be inherently dangerous if not used correctly.  End-User shall familiarize 
itself with all operation materials provided by StoneAge and shall at all times 
use and require its agents, employees and contractors to use all necessary 
and appropriate safety devices, guards and proper safe operating procedures.  
In no event shall StoneAge be responsible for any injuries to persons or 
property caused directly or indirectly by the operation of the Product if End-
User or any agent, employee, or contractor of End-User:  (1) fails to use all 
necessary and appropriate safety devices, guards and proper safe operating 
procedures; (2) fails to maintain in good working order such safety devices 
and guards; (3) alters or modifies the Product in any way not approved 
by StoneAge in advance in writing; (4)  allows the Product to be operated 
under more severe conditions or beyond the rated capacity specified for the 
Product; or (5) otherwise negligently operates the Product.    End-User shall 
indemnify and hold StoneAge harmless from any and all liability or obligation 
incurred by or against StoneAge, including costs and attorneys’ fees, to or by 
any person so injured.

TO THE FULL EXTENT ALLOWED BY APPLICABLE LAW, STONEAGE 

SHALL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, 
CONSEQUENTIAL, OR PUNITIVE DAMAGES (INCLUDING WITHOUT 
LIMITATION, LOSS OF PROFITS, LOSS OF GOODWILL, DIMINUTION OF 
VALUE, WORK STOPPAGE, INTERRUPTION OF BUSINESS, RENTAL OF 
SUBSTITUTE PRODUCT, OR OTHER COMMERCIAL LOSS EVEN TO THE 
EXTENT SUCH DAMAGES WOULD CONSTITUTE DIRECT DAMAGES), WITH 
RESPECT TO THE COVERED STONEAGE PRODUCT, OR OTHERWISE 
IN CONNECTION WITH THIS LIMITED WARRANTY, REGARDLESS OF 
WHETHER STONEAGE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH 
DAMAGES. 

IT IS UNDERSTOOD THAT STONEAGE’S LIABILITY, WHETHER IN 
CONTRACT, IN TORT, UNDER ANY WARRANTY, IN NEGLIGENCE, OR 
OTHERWISE SHALL NOT EXCEED THE AMOUNT OF THE PURCHASE 
PRICE PAID BY THE END-USER FOR THE PRODUCT.  STONEAGE’S 
MAXIMUM LIABILITY SHALL NOT EXCEED, AND END-USER’S REMEDY IS 
LIMITED TO EITHER (1) REPAIR OR REPLACEMENT OF THE DEFECTIVE 
WORKMANSHIP OR MATERIAL OR, AT STONEAGE’S OPTION, (2) REFUND 
OF THE PURCHASE PRICE, OR (3) ISSUANCE OF A CREDIT FOR THE 
PURCHASE PRICE, AND SUCH REMEDIES SHALL BE END-USER’S ENTIRE 

AND EXCLUSIVE REMEDY. 

YOU, THE END-USER, UNDERSTAND AND EXPRESSLY AGREE THAT 
THE FOREGOING LIMITATIONS ON LIABILITY ARE PART OF THE 

CONSIDERATION IN THE PRICE OF THE STONEAGE PRODUCT YOU 
PURCHASED. 

Some jurisdictions do not allow the limitation or exclusion of liability for 

certain damages, so the above limitations and exclusions may not apply to 
you.  This Limited Warranty gives you specific legal rights, and you may also 

have other rights which vary from jurisdiction to jurisdiction.  If any provisions 

of this Limited Warranty is held to be invalid or unenforceable, such invalidity 
or unenforceability shall not affect the validity or enforceability of the other 
portions hereof.

WARRANTY INFORMATION

Содержание PROPOSITIONER PROP-DBP

























































Отзывы: