16
866-795-1586 • WWW.STONEAGETOOLS.COM
LOAD THE HIGH-PRESSURE HOSE INTO THE SNOUT ON THE RAIL MOUNT
Before installing High-Pressure hose, please be sure to review the “HIGH-PRESSURE
HOSE”
information in the
“WARNING AND SAFETY INSTRUCTIONS” section of this
manual. Always flush out hoses before attaching tools to keep particle debris from
damaging the tool.
1. Lay the Rail Mount, Snout, and High Pressure Hose on the floor.
2. Insert the High Pressure Hose into the Camlock on the Snout Carriage and
through the entire Snout.
(Figure 13)
3. Leave enough hose slack coming out of the end of the Snout to continue to
push the end of the hose through the ABX-PRO Tractor and into the Guide
Tube later in the assembly.
(Figure 13)
4. Connect the Female, Threaded, Camlock end of the Snout to the Male end of
the Snout Carriage.
(Figure 13)
5. Install the Hose Stop on the hose behind the Snout Carriage. It will be
adjusted into the proper location after the system is operational.
(Figure 13)
SUB-ASSEMBLY 3 (RAIL MOUNT, SNOUT, AND HIGH PRESSURE HOSE)
FIGURE 14
Welded
Camlock
Threaded
Camlock
Hose
Hose Stop
Snout
Carriage
Rail
Mount Assembly
*ICM (top mount) style
shown here
FIGURE 13
Set This Assembly aside when complete.
(Figure 14)
Snout
Содержание PROPOSITIONER PROP-DBP
