Still RX60 25-35 Скачать руководство пользователя страница 64

Страница: 64 / 518

Residual risk

Residual dangers, residual risks

DANGER

Risk of explosion in the event of fire or

smouldering!
In the worst case scenario, polluted,

damaged or defective components can

result in fire or smouldering.
If you smell fire:

–

Immediately remove the truck from

the potentially explosive area and

park it safely.

–

Initiate fire-fighting procedures.

–

Inform the safety officer.

Despite careful working and compliance with

standards and regulations, the possibility of

other risks occurring when using the truck

cannot be entirely excluded.
The truck and all other system components

comply with current safety requirements. Nev-

ertheless, some residual risk cannot be exclu-

ded, even when the truck is used for its inten-

ded purpose and all instructions are observed.
A residual risk cannot be excluded even be-

yond the narrow limits of the danger area that

the truck itself represents. Persons in this area

around the truck must exercise a heightened

degree of awareness, so that they can react

immediately in the event of any malfunction,

incident or breakdown etc.

WARNING

Ignorance of the potential danger presented by a

truck can lead to serious accidents!
All personnel working in the vicinity of the truck must

be instructed regarding the hazards that arise

through use of the truck.
In addition, your attention is drawn to the safety regu-

lations given in these operating instructions.

–

Inform personnel working in the area of the truck

of possible hazards.

Safety

Residual risk

56378011526 EN - 03/2021 - 01

Содержание RX60 25-35







































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды

Still RX60 25-35, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды