Still RX60 25-35 Скачать руководство пользователя страница 200

Страница: 200 / 518

Cause

Effect

The emergency off switch is actuated.

The truck will coast to a stop.

Once the truck has come to a standstill, the

electric parking brake is applied with an audible

sound.

The LED (2) lights up with a steady light.

The symbol appears in the display.

The truck accelerates sharply, even though the

driver's seat has been vacated.

The electric parking brake is immediately ap-

plied with an audible sound.

The LED (2) lights up with a steady light. The

symbol appears in the display.

The truck accelerates sharply, even though the

accelerator pedal has not been actuated.

The parking brake is immediately applied with

an audible sound.

The LED (2) lights up with a steady light. The

symbol appears in the display.

Malfunctions in the electric parking

brake

DANGER

There is a risk of fatal injury from being

run over if the truck rolls away.

–

Do not park the truck on a gradient.

–

Do not leave the truck until the park-

ing brake has been applied.

–

In an emergency, secure the truck

with wedges on the downhill-facing

side to prevent it from rolling away.

–

Before leaving the truck, make sure that the

parking brake is properly applied.

Operating

Driving

186

56378011526 EN - 03/2021 - 01

Содержание RX60 25-35







































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды

Still RX60 25-35, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды