Still RX60 25-35 Скачать руководство пользователя страница 357

Страница: 357 / 518

Towed load

DANGER

There is an increased risk of accident when using a

trailer.
Using a trailer changes the truck handling character-

istics. When towing, operate the truck such that the

trailer train can be safely driven and braked at all

times. The maximum permissible speed when towing

is 5 km/h.

–

Do not exceed the permissible speed of 5 km/h.

–

Do not couple the truck in front of rail vehicles.

–

The truck must not be used to push any kind of

trolley.

–

It must be possible to drive and brake at all times.

CAUTION

Risk of damage to components!
The maximum towed load for occasional towing is

the rated capacity specified on the nameplate. Over-

loading can lead to component damage on the truck.

The sum of the actual towed load and the actual load

on the fork must not exceed the rated capacity. If the

towed load present corresponds to the rated capacity

of the truck, it is not permitted to transport a load on

the fork at the same time. The load can be distrib-

uted between the fork and the trailer.

–

Check the load distribution and adjust it to corre-

spond to the rated capacity.

–

Observe the permissible rigidity value of the tow

coupling.

CAUTION

Risk of damage to components!
The maximum towed load only applies when towing

unbraked trailers on a level surface (maximum devia-

tion +/- 1%) and on firm ground. The towed load

must be reduced if towing on gradients. If necessary,

notify the authorised service centre of the application

conditions. The service centre will provide the re-

quired data.

–

Inform the authorised service centre.

CAUTION

Risk of damage to components!
A support load is not permitted.

–

Do not use trailers with tillers supported by the

tow coupling.



Operating

Trailer operation

343

56378011526 EN - 03/2021 - 01

Содержание RX60 25-35







































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX60 25-35

Отзывы:

Still RX60 25-35, Оригинальное руководство пользователя, Страница: 357 / 518

Результаты поиска

Содержание RX60 25-35

Отзывы: