Still RX60 25-35, Оригинальное руководство пользователя

Страница: 392 / 518

CAUTION
Possibility of damaging the battery male connectors!
If the battery male connectors are disconnected
while the key switch is switched on (under load), an
arc will be produced. This can cause the contacts to
erode, which considerably shortens the service life of
the contacts.
–
Switch off the key switch before the battery male
connectors are disconnected.
–
Do not disconnect the battery male connectors
while the key switch is switched on, except in an
emergency.
Procedure
–
Set down the load and lower the fork arms
close to the ground.
–
Set the drive direction switch to the neutral
position.
–
Apply the parking brake.
–
Switch off the truck.
–
Disconnect the battery male connector.
–
Check the pulling and braking forces of the
towing vehicle.
–
With the help of a guide, move the towing
vehicle to the truck.
–
Secure the tow bar to the tow coupling on
the towing vehicle and the truck.
–
Sit in the driver's seat in the truck being
towed. Fasten the seat belt.
–
Use the available restraint systems.
–
Manually release the parking brake (refer to
the previous section entitled "Emergency
actuation of the electric parking brake".
The truck is now held in place only by the
braking force of the towing vehicle.
–
Select a towing speed that allows the truck
and towing vehicle to be effectively braked
and controlled at all times.
–
Tow the truck out of the potentially explo-
sive area.
Operating
4
Procedure in emergencies
378 56378011526 EN - 03/2021 - 01