Still RX60 25-35 Скачать руководство пользователя страница 231

Страница: 231 / 518

Tilting the lift mast

To tilt the lift mast forwards:

–

Move the "tilting" operating lever (1) in the

direction of the arrow (C).

To tilt the lift mast backwards:

–

Move the "tilting" operating lever (1) in the

direction of the arrow (D).

Movements of the lifting system and

meanings of the pictograms

Lowering

Lifting

Tilting forwards

Tilting backwards

Controlling the lifting system using

the Joystick 4Plus

DANGER

Reaching into or climbing between moving parts of

the truck (e.g. lift mast, sideshifts, working equip-

ment, load carrying devices etc.) can lead to seri-

ous injury or death and is therefore prohibited.

–

Observe the safety regulations for handling loads.

–

Operate the lifting system from the driver's seat

only.

WARNING

Risk of accident as a result of an operating error!
These operating instructions describe how to operate

the lifting system in the factory configuration.
If the authorised service centre has configured a dif-

ferent configuration, the newly applied pictograms

must be observed to ensure safe operation. The op-

erating company must make all drivers aware of the

fact that a different configuration has been config-

ured.

–

Observe the pictograms on the operating levers.

–

Before use, check that the hydraulic functions are

working correctly.

The lifting, lowering and tilting movements of

the lift mast are controlled using the Joy-

stick 4Plus (1). The adhesive labels bearing

Operating

Lifting

217

56378011526 EN - 03/2021 - 01

Содержание RX60 25-35







































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды

Still RX60 25-35, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды