Still RX60 25-35 Скачать руководство пользователя страница 194

Страница: 194 / 518

–

Lift the fork carriage until the necessary

ground clearance is achieved.

–

Tilt the lift mast backwards.

–

Release the parking brake.

–

Press the right accelerator pedal (1) for the

"forwards" drive direction and press the left

accelerator pedal (2) for the "backwards"

drive direction.

NOTE

In the dual pedal version, the drive direction

switches on the operating devices do not func-

tion.

The indicator for the selected drive direction

("forwards" (1) or "reverse" (2)) lights up on

the display-operating unit.

NOTE

Depending on the equipment, the following

variants of warning units for reverse travel

may be present:

●

An acoustic signal will be heard.

●

The STILL SafetyLight lights up.

●

The hazard warning system flashes.

The truck travels in the selected drive direc-

tion. The speed is controlled by the accelera-

tor pedal position. The truck brakes when the

accelerator pedal is released.

NOTE

The truck is also held in place on ascending or

descending gradients even if the electric park-

ing brake is not engaged.

5060_003-085



Operating

Driving

180

56378011526 EN - 03/2021 - 01

Содержание RX60 25-35







































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды

Still RX60 25-35, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды