Still RX60 25-35, Оригинальное руководство пользователя

Страница: 367 / 518

Limiting the load dynamics to load program 1
during the warm-up phase
NOTE
During the warm-up phase, the load dynamics
are limited to load program 1. The adjacent
symbol appears on the display until the warm-
up phase is complete.
–
To ensure operational safety, drive the truck
for approximately five minutes and actuate
the brake several times.
–
Actuate all hydraulic lifting functions several
times.
This warm-up phase is necessary to ensure
that the oil reaches the operating temperature.
–
Refer to the section entitled "Warming up
the hydraulic oil at cold ambient tempera-
tures" in the chapter entitled "Operation —
Checks and tasks before daily use."
–
Always park the truck outside the cold
store.
CAUTION
Risk of component damage!
The lead-acid batteries must not be left in the cold
store overnight without power uptake or charging.
–
Charge the battery outside the cold store
and operate the truck using a replacement
battery.
Using batteries in the cold store
To compensate for the reduction in capacity at
low temperatures, it is advisable to use lead-
acid batteries with the maximum nominal ca-
pacity in the respective battery dimensions for
the truck series.
Electric trucks must not be parked in a cold
area for any longer than necessary. This also
applies to unused batteries. The charging sta-
tion and the parking area for trucks and batter-
ies must be at normal room temperature (not
below 10°C). Charging is extremely slow at
low temperatures. At temperatures below
6219_003-312

Operating
4
Cold store application
353 56378011526 EN - 03/2021 - 01