Still RX60 25-35 Скачать руководство пользователя страница 197

Страница: 197 / 518

Despite these automatic aids, the driver is al-

ways responsible for parking the truck safely.

The safety information about parking the truck

safely applies.

NOTE

The electric parking brake can be actuated or

released only if the battery male connector

has been connected

and the truck is switched

on.

If the parking brake is applied, this is indicated

by a symbol in the display-operating unit in-

stead of the driving speed.

Symbols for the parking brake in the display-operating unit

Symbol

Description
The parking brake was applied automatically.

Actuating the accelerator pedal automatically releases the parking brake.
The parking brake was applied by pressing the push button.

Pressing the push button is the only way to release the parking brake.

Releasing the electric parking brake af-

ter the truck has been switched on

–

Press the push button (1) to release the

parking brake.

The truck is held in place by the traction mo-

tor.

Manually actuating the electric parking

brake when the truck is stationary

Applying the parking brake manually

–

Press the push button (1).

The electric parking brake will make a noise

when it is applied and the LED (2) lights up

continuously. The symbol appears in the

display.
Releasing the parking brake manually

–

Sit on the driver's seat.

–

Press the push button (1).

The electric parking brake will make a noise

when it releases and the LED (2) goes out.

6219_003-006_V2



Operating

Driving

183

56378011526 EN - 03/2021 - 01

Содержание RX60 25-35







































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды

Still RX60 25-35, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды