Still RX60 25-35 Скачать руководство пользователя страница 60

Страница: 60 / 518

Tyres

DANGER

Risk of explosion!
In potentially explosive areas, wheels

and tyres that do not meet explosion-

protection regulations may lead to explo-

sions in the surrounding atmosphere.

–

Only use approved, electrically con-

ductive tyre types.

–

Ensure that they are correctly labelled

(1).

If "non-marking" tyres (non-marking, light-col-

oured) are used, antistatic belts must be at-

tached beneath the truck. These antistatic

belts have an electrically conductive connec-

tion to the chassis and the other end drags

along the floor. In addition, a corona electrode

with leak resistance must be fitted.
Non-marking tyres are identified by the safety

information.

–

Observe the explosion-protection regula-

tions.

–

Ensure that permissible tyres are used.

–

Check the presence and condition of the

antistatic belts/corona electrode.

–

If in doubt, speak to the safety officer.

NOTE

Electrically conductive tyres are required on

both axles!

DANGER

Risk to stability!
Failure to observe the following information and in-

structions can lead to a loss of stability. The truck

may tip over. Risk of accident!

The following factors can lead to a loss of sta-

bility:

●

Different tyres on the same axle, e.g. pneu-

matic tyres and superelastic tyres

●

Tyres not approved by the manufacturer

●

Excessive tyre wear

●

Tyres of inferior quality

5063_901-033



Safety

Basic principles for safe operation

56378011526 EN - 03/2021 - 01

Содержание RX60 25-35







































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды

Still RX60 25-35, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды