Still RX60 25-35 Скачать руководство пользователя страница 323

Страница: 323 / 518

Picto-

gram Attachment function

Tip shovel over
Tip shovel back

NOTE

The pictograms are affixed according to the

attachment fitted at the factory. If an attach-

ment with different functions is fitted, the au-

thorised service centre must check that the

pictograms bear the correct representation

and must change them if necessary.

Clamp locking mechanism

–

To release the clamp locking mechanism,

push the operating lever (2) forwards.

The clamp locking mechanism is released.

The LED for the "clamp release" (1) lights up

and remains lit while the clamp locking mech-

anism is released.

NOTE

The hydraulic function for opening the clamp

is available for one second after the clamp

locking mechanism is released. After one sec-

ond, the clamp locking mechanism is automat-

ically reactivated.

–

To open the clamp, push the operating lev-

er (2) forwards again.

It is not necessary to release the clamp lock-

ing mechanism in order to close the clamp.

–

To close the clamp, pull the operating lev-

er (2) backwards.



Operating

Attachments

309

56378011526 EN - 03/2021 - 01

Содержание RX60 25-35







































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды

Still RX60 25-35, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60 25-35

Отзывы:

Бренды по названию

Популярные бренды