Still RX60 25-35 Скачать руководство пользователя страница 394

Страница: 394 / 518

Connecting and disconnecting the battery male connector

Connecting the battery male con-

nector

DANGER

Risk of explosion!
Working on a truck within potentially ex-

plosive areas can lead to explosions in

the surrounding atmosphere.
Do not perform any work on the truck in

potentially explosive areas!

CAUTION

Risk of damage to the battery male connectors!
If the battery male connectors are connected while

the key switch is switched on (under load), a jump

spark will be produced. This jump spark can damage

the contacts and considerably shorten the service life

of the contacts.

–

Switch off the key switch before the battery male

connectors are connected.

NOTE

The battery male connectors are non-inter-

changeable.

●

The battery connectors are routed through

different grooves. Incorrect connection is

not possible.

●

The "positive" battery male connector is

red.

●

The "negative" battery male connector is

blue.

–

Open the battery door.

Operating

Connecting and disconnecting the battery male connector

380

56378011526 EN - 03/2021 - 01

Содержание RX60 25-35







































































































































































































































































































































































































































































































































Результаты поиска

Содержание RX60 25-35

Отзывы:

Still RX60 25-35, Оригинальное руководство пользователя, Страница: 394 / 518

Результаты поиска

Содержание RX60 25-35

Отзывы: