Still RCG40 Скачать руководство пользователя страница 98

Страница: 98 / 180

Before lifting a load

Before lifting a load, check the load capacity

diagram (1) on the engine cover.
The maximum capacity is determined by the

lifting height and the load centre distance.

NOTE

Check the load capacity limits and contact

your authorised dealer before transporting:

–

off-centre or swinging loads

–

loads with the mast tilted forwards or the

load not near the ground

–

loads beyond the centre of gravity

–

before operating attachments

–

loads at wind force 6 and higher

Transporting pallets

As a rule, loads (e.g. pallets) must be trans-

ported individually. Transporting multiple loads

at the same time is only permitted:

●

when instructed by the supervisor and

●

when the technical requirements have been

met.

The driver must ensure proper condition of the

load. Only safely and carefully positioned

loads may be transported.

Danger area

The danger area is the area in which people

are at risk due to the movements of the truck,

its working equipment, its load-carrying equip-

ment (e.g. attachments) or the load. Also in-

cluded are the areas where loads could fall or

working equipment could fall or be lowered.



6327_003-009



Use and Operation

Handling loads

60118011601 EN - 09/2020

Содержание RCG40





















































































































































































Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды

Still RCG40, Оригинальное руководство пользователя

Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды