Still RCG40 Скачать руководство пользователя страница 77

Страница: 77 / 180

Climbing on/off the forklift

After performing the daily checks, carry out

the following operations to use the truck.

CAUTION

Always face the vehicle when dismounting the fork-

lift, in order to prevent injury to the legs and back.

NOTE

Do not grip the steering wheel or joysticks

when climbing on /off the forklift.

–

First place your left foot on the step(1). Grip

the handrail (2)or overhead guard beam

and climb on the truck from the left-hand

side.

–

Use the step and handrail or overhead

guard beam to climb off from the left-hand

side.

CAUTION

Do not climb on or off the truck from the right hand

side unless it is an emergency.

Adjustment of the driver’s seat

CAUTION

Slide the driver’s seat to find the best operating posi-

tion relative to the steering wheel, the accelerator

and braking pedals, and the joystick.
Before starting the truck and whenever changing

drivers, adjust the seat to match the driver’s weight

and make sure that the settings have all engaged

properly. Do not place any objects in the driver’s ro-

tation range.

NOTE

Remaining in a sitting position for long periods

of time puts a great amount of pressure on the

spine. Make sure this pressure is reduced by

bending forwards frequently.



Use and Operation

Using the truck

60118011601 EN - 09/2020

Содержание RCG40





















































































































































































Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды

Still RCG40, Оригинальное руководство пользователя

Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды